- December 17, 2018 /
- Posted by admin
Figuring out what hardwood floors is right for you amongst all the many choices available on the market might seem like a difficult task. To help you choose, we have created a simple 5-steps easy to follow guide about hardwood floors in San Francisco.
Engineered or Solid
Engineered floors are a better choice for different reasons:
They resist wood’s natural tendency to change dimensionally over time and in areas with variable humidity levels. Engineered floors are more stable than solid wood. These floors are comprised of multiple layers of wood. These layers are cross-banded for stability and glued onto a plywood base. The graining of each layer runs in opposite directions, which makes engineered floors very stable.
This means the wood will expand and contract less than solid wood flooring during fluctuations in humidity and temperature.
They are ideal for applications such as over radiant heat installations, in kitchens, bathrooms, and basements or where a floor is needed to span two differing subfloors like plywood and concrete.
Compared to solid wood flooring, engineered flooring makes better use of our dwindling natural resources. It can yield up to four times the amount of flooring using the same amount of high-quality wood.
Choose your wood type of hardwood floors in San Francisco according to hardness and grain pattern. For example, Hickory is a very hard wood and has lots of character (knots) and variation in color.
Less knots and variation is found in domestic White Oak and European White Oak – very popular floor for his durability and appealing natural grain. To avoid character altogether, choose a select grade. Maple is also hardwood and presents no character. Cherry and Walnut are very beautiful but considered quite “soft” wood types.
All the exotic wood species, like Brazilian Cherry, are very hard but not ideal for application over radiant heat.
There’s a whole spectrum of finishing products from penetrating oil to prefinished UV-cured oil or water-based polyurethane finishes.
Oil finish penetrates the wood and gives the floor a natural matte look. It scratches more easily, but it is reparable simply buy cleaning the floor with the proper natural soap which will make scratches less noticeable.
A polyurethane finish creates a hard topcoat on the surface of the wood that’s more resilient to wear and tear. Especially its good for people with children and pets.
To repair scratches one generally needs to replace a board or sand and recoat an entire section of the floor.
Plank Width and Texture
A wide plank is very popular because it brings a sense of luxury and elegance to your home.
Seven inches has become the standard wide-plank floor,” and sizes can go up to 10 or 11 inches. However, consider that a wide plank fits in a more expansive room, while a narrower plank will look better in a smaller space. Another benefit of a wider plank is that the overall look is less busy because you will see fewer plank ends and grain variation.
You can choose texture varying from smooth, wire brushed and hand scraped. It goes without saying that the more texture the less dust or prints will show on your hardwood floors in San Francisco.
You should choose a floor color of hardwood floors in San Francisco that creates a contrast with your walls and décor to avoid a cluttered looking room. Choose lighter colored wood flooring for smaller and darker rooms. If you have a room with light colored walls, then choosing dark hardwood flooring will create a modern and contemporary look.
If you are covering a high traffic area, selecting a natural color floor will help conceal scratches and dents. Always bring home wood samples to view them in your own light and see how they look alongside your walls and furniture.